(844) 404-4588
24/7 Customer Support
ZP-29B Rotary Tablet Press
This machine is kind of automatic rotary machine for continuous tablet pressing. It is mainly used for the production of tablet in pharmaceutical industry. It is also suitable for other industries such as chemical, foodstuff and electronics to press the granular material into tablets.
ZP Rotary Tablet Press Machine
Feature：
1. This machine integrates automatic rotation, frequency-conversion, speed-adjusting with continuous tablet-pressing. It is mainly used for the manufacture of tablet in pharmaceutical continuous; it also applies to press the granular material into tablet in the industry of chemical, food, electronic etc.
2. This machine applies to the pressing of granular material of which powder content(over100 hole) is below 10% and it can’t be used for the pressing of half solid, damp granular. Low melting point, easy damping material and the powder without granulator.
3. This machine can produce round, special-shaped and character-engraved tablets ï¿ 5—20mm.
Change the mold to compress tablets of different shapes
rotary tablet press advantages：
1.Guarantees a higher output as high production levels can be achieved with a minimal amount of labor.
2.Higher outputs save time and enable you to meet your large production demands.
3.It reduces wastage of material.
4.It allows independent control of both the weight and hardness of tablets.
Introduction
This machine is kind of automatic rotary machine for continuous tablet pressing. It is mainly used for the production of tablet in pharmaceutical industry. It is also suitable for other industries such as chemical, foodstuff and electronics to press the granular material into tablets.
Specifications
| Punch quantity (set) | 29 |
|---|---|
| Max. tablet pressure (kN) | 80 (Pre-pressure 500 kg) |
| Max. tablet diameter (mm) | 20 |
| Max. tablet thickness (mm) | 6 |
| Max. filling depth (mm) | 15 |
| Max. production capacity (pc/h) | 80,000~120,000 |
| Speed of turntable (r/min) | 14~35 |
| Pitch diameter (mm) | 420 |
| Diameter of middle punch (mm) | 26 |
| Height of middle punch (mm) | 22 |
| Diameter of upper and lower punch (mm) | 22 |
| Length of upper and lower punch rod (mm) | 115 |
| Main motor power (kW) | 5.5 |
| Dimension (LWH) (mm) | 910×1120×1650 |
| Weight (kg) | 2300 |
Remarks
- This machine is applicable (within the scope of the pressure of the machine) to granular raw materials with the contents of powder (with the size being above 100 mesh) not to be more than 10%.
- This machine is applicable to pressing engraved or non-engraved round tablets with the diameter being between 4 and 13mm.
- This machine is not applicable to semi solids, wet granules, raw materials with a low melting point or easy to get wet or non-granular powder.
- It is mainly used for the production of tablet in pharmaceutical industry.
