(844) 404-4588
24/7 Customer Support
USA Lab 20L Centrifuge Turnkey System – XTC-20-TK
| Brand: | USA Lab |
| Material: | 304 Stainless |
| Power Requirements: | 240V 5A 3Ph 1.5 kW Explosion Proof Motor |
$42,799.00
Our XTC-20-TK 100L Centrifuge Turnkey System allows users the ability to extract botanical compounds to achieve superb results and separation while maintaining a closed-loop system. The XTC-20 System takes 5–20lbs of biomass and 25-40 gallons of ethanol per batch for approximately 192-300lbs of dry material per 8-hour shift with a single operator. The XTC system comes with 2 x 150L Storage Vessels for ethanol pre-storage as well as ethanol mixture post storage.
Each tank is fully jacketed and fully assembled to allow for fluids circulation with temperatures of up to -80°C, a 12” lid connection for numerous port connections, and a 6” bottom for ease of cleaning/draining. Fluid can transfer from each vessel via two diaphragm operated fluid pumps being operated by an air compressor. These pumps are easily operated and allow for up to 10 gallons per minute of fluid transfer. Each pump has a bypass which allows full line clear when the units are not in operation as well as easily adjustable air inlet, and inlet/outlet valves.
The XTC system also comes packed with one of USA Lab’s most advanced chillers, the UC-30/80 30L -80°C chiller. This chiller can be run in tandem with the inlet ethanol storage tank that then is connected to the centrifuge jacket allowing for ultimate temperature control of the ethanol and mixture. The XTC-20-TK system is an easy-to-use turnkey ethanol extraction system that can fit into any lab setting with ease. This system fits in perfectly pre-filtration and recovery to act as a modular fit for a full system.
|
XTC-20L Turnkey Packing List |
|
|
ITEM |
QTY |
|
20L Jacketed Stainless Steel Centrifuge |
1 |
|
-80°C 30L Recirculating Chiller UC-30/80 |
1 |
|
USA Lab 150L Stainless Steel Jacketed Storage Vessel |
2 |
|
Hemispherical Reducer – Tri Clamp 6″ to 1/2 FNPT – S |
2 |
|
USA Lab 12″ Hemispherical Lid – (2x 2″ TC), (1x 3″ TC), (2x 1/2″ MNPT), (1x 1/4″ FNPT), (1x 3/8 MNPT) |
2 |
|
ARO Diaphragm Fluid Transfer Pump, Kynar® Fully Assembled |
2 |
|
Superlok FNPT 210 Series Ball Valve – 1/2″ |
6 |
|
3/8″ Superlok FNPT 210 Series Ball Valve – 3/8″ |
2 |
|
Glycerin Compound Gauge -1/4″ |
2 |
|
MNPT To Barb Adapter [ 1/2″ Barb x 1/2″ MNPT ] |
10 |
|
MNPT to FNPT Street Elbow [ 1/2″ X 1/2″ ] |
4 |
|
1/2″ Male Elbow NPT 90 Degrees |
2 |
|
MNPT To Barb Adapter [ 3/8″ Barb x 3/8″ MNPT ] |
2 |
|
2″ Polycarbonate Sight Glass |
4 |
|
3″ Solid Tri Clamp End Cap |
2 |
|
Buna – 2″ |
4 |
|
Buna – 3″ |
2 |
|
Buna – 6″ |
2 |
|
Buna – 12″ |
2 |
|
SPTC – 2″ |
4 |
|
SPTC – 3″ |
2 |
|
SPTC – 6″ |
2 |
|
SPTC – 12″ |
2 |
|
1/2 ” Silicone Hose Tubing – 10FT |
2 |
****THIS IS NOT CERTIFIED AND CARRIES NO UL, NRTL, OR C1D1 RATING. PLEASE KEEP THIS IN MIND PRIOR TO PURCHASING****
***DISCLAIMER*** Our closed loop systems are intended for legal purposes only.
They are to be used in well ventilated areas and under accordance with local laws.
USA Lab 20L Jacketed Stainless Steel Centrifuge XTC-20
comes with 4 bags 100 microns
**Our XTC Centrifuges come standard with an explosion proof motor**
Our 20L Centrifuge system allows users to perform botanical extraction while maintaining a closed loop system, exposing no solvents to the air. Our systems is designed for easy material loading and unloading. 2″ Tri-clamp drain. Reinforced sight glass. Bi-Directional agitation. Variable speed control. No expense has been spared with this system to provide high quality parts at an affordable price.
|
XTC-20 Specifications |
|
|
Material |
304 Stainless Steel |
|
Electrical |
240V 3-Phase 1.5kW 5A Explosion Proof Motor |
|
Max RPM |
1900 rpm |
|
Max Plant Load |
15-20lbs |
|
Basket Volume |
20L |
|
Jacket Size |
20L |
|
Lid Connections |
3x 1.5″ Tri-Clamp |
|
Jacket Connections |
2x 1.5″ Tri-Clamp |
|
Drain Connections |
1.5″ Tri-Clamp |
|
Gasket Material |
PTFE |
|
Lid Gasket Material |
Silicone |
|
Basket Diameter |
450mm |
|
Exterior Dimensions |
37.4″L x 23.6″W x 34.2″H |
|
Weight |
661lbs |
**Will need to add explosion proof conduit from centrifuge to controller. Not included.
The USA Lab UC-30/80 is a powerful -80°C Chiller with a 30L Reservoir. This chiller is a true lab chiller than is ideal for applications involving vacuum systems, jacketed reactors, rotary evaporators, columns, solvent tanks, and even analytical instruments.
The USA Lab UC-30/80 chillers offer unbeatable performance, ease of use, and high reliability. These units keep quiet despite having a powerful pump allowing for constant flow rates to match the needs of demanding applications.
|
SPECIFICATIONS |
||
|
Model |
UC-30/80 |
|
|
Reservoir Capacity |
30L |
|
|
Reservoir Dimensions |
13.7″ x 13.7″ |
|
|
Temperature Range |
Room Temp to -80°C / -112°F |
|
|
Power Requirements |
220-240V 60Hz 30A 5250W Single Phase |
|
|
Control Type |
PLC Touchscreen |
|
|
Refrigeration BTUs |
16,000BTU – 1,450BTU |
|
|
Circulating Pump Wattage |
100W |
|
|
Temperature Accuracy |
+/- 0.5°C |
|
|
Pump Flow |
30L/Min |
|
|
Lift (Max Pumping Height) |
4m (12ft) |
|
|
Pump Pressure |
2.2bar |
|
|
Barb Size |
5/8″ |
|
|
Refrigerant |
R404 |
|
|
External Dimensions |
39″ x 31.9″ x 48.4″ |
|
|
Weight |
473lbs |
|
|
Warranty |
1 Year |
|
|
PACKING LIST |
||
|
Model |
Quantity |
|
|
USA Lab UC-30/80 -80°C Chiller |
1 |
|
|
5/8″ Insulated Tubing |
11ft |
|
|
5/8″ Barbed Valve |
1 |
|
|
PTFE Sealing Tape |
1 |
|
|
Manual |
1 |
|
Our 300L Stainless Steel Jacketed Storage Vessel come with a 12″ opening and a 6″ bottom for ease of use and access. Each vessel is fully jacketed with 1/2″ FNPT inlet ports to allow circulation of warm or cold fluids. These reactors are great for filtration, chilling solvents, mixing, winterization, and even ethanol extraction!
|
300L-JSSR SPECIFICATIONS |
|
•Material/Rating: 304SS/150PSI |
|
•Exterior Dimensions: 24″ L x 24″ W x 63″ H |
|
•Lid size: 12″ Tri-clamp |
|
•Bottom size: 6″ Tri-clamp |
|
•Jacket Connections: 1/2″ FNPT |
|
•Ground to Bottom: 14″ |
|
•Jacket Capacity: 35L |
Offering high volume delivery even at low air pressure this ARO® double diaphragm pump features maximized flow rates with minimal pulsation and air consumption. This air-operated, double-diaphragm model utilizes a pressure differential in the air chambers to alternately create suction and a positive fluid pressure in the fluid chambers, and ball checks to help insure a positive fluid flow. Pump can provide reliable operation with innovative, lube-free differential valve both on the major air valve and Simulshift™ pilot valve for worry-free operation.
*We recommend an Air Compressor with 8 CFM or more.*
|
ARO Specifications |
|
|
Item |
Double Diaphragm Pump |
|
Pump Operation Type |
Air Operated |
|
Max. Flow |
14 gpm |
|
Max. Temp – Pumps |
150°F |
|
Housing Material – Pumps |
Polypropylene |
|
Inlet / Outlet Size |
1/2″ |
|
Connection Style |
NPT |
|
Air Inlet Size |
1/4″ FNPT |
|
Diaphragm Material – Pumps |
Santoprene(R) |
|
Agency Compliance |
CE, REACH, RoHS |
|
Valve Type |
Ball |
|
Max. Operating Pressure |
100 psi |
|
Ball Material |
Santoprene(R) |
|
Check Seat Material |
Polypropylene |
|
Max. Dia. Solids |
3/32″ |
|
Manifold Connection |
Multiport |
|
Length |
13.75″ |
|
Width |
7.5″ |
|
Height |
11.625″ |
|
Self-Priming Dry |
10ft |
|
Self-Priming Wet |
15ft |
|
Manufacturer’s Warranty Length |
5 years |
|
Packing List for Assembled Pump |
|
|
ITEM |
QTY |
|
ARO 1/2 ” Diaphragm Pump |
1 |
|
Superlok Compression 210 Series Ball Valve -65ºC to 21ºC at 1000PSI [ 1/4″ ] |
1 |
|
Superlok Compression 210 Series Ball Valve -65ºC to 21ºC at 1000PSI [ 1/2″ ] |
2 |
|
Superlok FNPT 210 Series Ball Valve – 316SS -53ºC to 21ºC at 1000PSI [1/4″] |
1 |
|
FNPT x MNPT x MNPT 3-Way Street Tee [1/4″] |
1 |
|
MNPT to FNPT Street Elbow [1/4″ X 1/4″] |
1 |
|
MNPT x MNPT Hex Nipple Union [1/4″ x 1/4″] |
2 |
|
Superlok O.D. Tube X MNPT Connector – SMC [1/4″] |
1 |
|
Superlok MNPT Connector X O.D. Tube – SMA [ 1/2″ ] |
2 |
|
Superlok 1/2″ HB X 1/2″ TUBE STUB |
2 |
|
Superlok Compression Reducing Tee – SRUT [ 1/2″” X 1/4″ ] |
1 |
|
MNPT Hex Plug [1/2″] |
3 |
|
NORGREN Regulator,1/4 In |
1 |
|
GRAINGER Pressure Gauge |
1 |
|
ColorConnex Connector |
1 |
For Technical Support, Questions, or Other Issues Please Email or Call Us!
