IP-80 Immersion Probe Cooler, 1.75 Diameter Rigid Coil Probe with 180 Degrees bend, -80 Degrees to -40 Degrees C, 120V, 60Hz
- Continuous cooling to temperatures as low as -100°C
- Designed to run at maximum cooling
- An economical alternative to dry ice or liquid nitrogen
- Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids
Description
PolyScience P80NMA101B – IP-80 Bent Probe Immersion Cooler, -80 deg C Fixed Setpoint, 120V/60Hz
- IP-80 Immersion Probe Cooler
- 1.75 inch Rigid Coil Probe with 180 bend
- -80 to -40C, 120V, 60Hz
PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100°C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators.
Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100°C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping.
Immersion Probe Style Coolers – Excellent for trapping and Dewar-type applications, these coolers reduce the expense of using dry ice or liquid nitrogen. A flexible hose allows convenient placement of the cooling probe.
Flow-Through Style Coolers – Extend the temperature range of non-refrigerated circulators to below ambient and boost the cooling capacity of refrigerated circulators. These coolers also offer an extremely economic alternative to tap water cooling of heated circulating baths when rapid cool-downs or operation at or near ambient is needed.
Excellent for trapping and Dewar-type applications.
Immersion Probe Cooler can be used to achieve low-temperature capability with non- refrigerated circulating baths or boost the cooling capacity of refrigerated circulators. It is also excellent for trapping and Dewar-type applications, making it an economical alternative to dry ice or liquid nitrogen. A 6-ft. (1.83 m) flexible hose allows convenient placement of the cooling probe.
It will take you very little time to get your Immersion Probe Cooler installed and running. This operator’s manual is designed to guide you quickly through the process. We recommend that you read it thoroughly before you begin.
IMPORTANT: The temperature display is for reference only. The actual temperature of the immersion probe will be colder than the displayed temperature.
Cold Finger Immersion Probe
Flexible Immersion Probe
1.75” Rigid Coil Probe
Insulated Flexible Hose |
Rigid Coil Probe (3″) |
Rigid Coil Probe (1.5″) |
Rigid Coil Probe (1.75″) |
Rigid Cold Finger Probe |
Flexible Cold Finger Probe |
Model |
IP-100, IP-80, IP-60, IP-35 |
IP-100, IP-35 |
IP-60 |
IP-80, IP-35 |
IP-100 |
IP-100 |
DIameter |
IP-100, IP-80: 2.83″ / 7.14 cm
IP-60, IP-35: 1.5″ / 3.81 cm |
3″ / 7.62 cm |
1.5″ / 3.81 cm |
1.75″ / 4.44 cm |
0.7″ / 1.78 cm |
0.625″ / 1.59 cm |
Length |
IP-100, IP-80: 6′ / 1.83 m
IP-60, IP-35: 4′ / 1.22 m |
Coil: 9″ / 22.9 cm
Exposed:17″ / 43.2cm |
Coil: 4″ / 10.2 cm
Exposed:15″ / 38.1cm |
Coil: 7″ / 17.8 cm
Exposed: 16.5″ / 41.9 cm |
3.75″ / 9.53 cm |
15″ / 38.1 cm |
Manufacturer Specs
Key Specifications |
Description |
Immerson Probe-80, 1.5″ Rigid Coil |
Display |
Temperature |
Working Temperature Range °C |
-80° to -40° |
Temperature Control (°C) |
Fixed at -80°C |
Common Specifications |
Working Temperature Range °F |
-112° to -40° |
Working Temperature Range °C |
-80° to -40° |
Temperature Control (°F) |
Fixed at -112° |
Temperature Control (°C) |
Fixed at -80°C |
Cleanable Air Filter |
Yes |
Display |
Temperature |
Maximum Ambient Temperature °F |
86° |
Maximum Ambient Temperature °C |
30° |
Overall Dimensions (L x W x H) (inches) |
20.1 x 15 x 22.3 in |
Overall Dimensions (L x W x H) (cm) |
51.1 x 38.1 x 56.6 cm |
Refrigerant |
R404A & R508B |
Immersion Probe Type |
Rigid Coil |
Probe Diameter (inches) |
1.75 |
Probe Diameter (cm) |
4.44 |
Probe Length (inches) |
Coil: 7 / Exposed: 16.5 |
Probe Length (cm) |
Coil: 17.8 / Exposed: 41.9 |
Flexible Hose Diameter (inches) |
2.83 |
Flexible Hose Diameter (cm) |
7.14 |
Flexible Hose Length (feet) |
6 |
Flexible Hose Length (m) |
1.83 |
Shipping Weight (pounds) |
162.0 |
Shipping Weight (kilograms) |
73.5 |
Tech Specs
Water Baths Recirculating Heating Chillers Coolers
|
Voltage (Life Science) |
100-120 VAC Only |
Type (Chillers/Baths) |
Dip Cooler / Cold Finger |
Max Temp (Chillers/Baths) |
-40 C |
Min Temp (Chillers/Baths) |
-80 C |
Test Equipment General Attributes
|
Shipping Weight |
171 LBS |
Country of Origin |
United States |