1 SciSolLogoWhite

(844) 404-4588

24/7 Customer Support

BVV™ SF6S 6CFM Single Stage Spark Free Vacuum Pump

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

$305.00

BVVâ„¢ SF6S 6CFM Two Stage Spark Free Vacuum Pump

 

This is the BVVâ„¢ SF6S 6CFM Two Stage Spark Free Vacuum Pump

Please Refer to these charts for vacuum specifications at altitude and conversions:

Key Features:
    • Internal Check Valve
    • Spark Free Construction

    • Oil Mist Filter Cap

    • Larger Oil Reservoir for longer Oil life

    • Lightweight

    • Rubber Feet for noise dampening

    • Reliable, Economical and Efficient.

 

Models BVVSF6S BVVSF6D BVVSF12D
Stage 1 2 2
Ultimate Vacuum (Microns) 75 15 15
Refrigerant Classes A1 Non-Toxic, Non Flammable A2 Non-Toxic, Low Flammability A3 Non-Toxic, High Flammability
Dimensions (in) 12.4 x 4.8 x 10.16 13 x 5.5 x 10.7 15 x 6.3 x 11.22
Weight (lbs) 16.5 24.3 33.6
Free Air Displacement 6.4 CFM 6.4 CFM 12.8 CFM
Motor Size (HP) RPM 1 HP 3440 RPM
Oil Capacity 14.5oz / 410ml 19oz / 410ml 20.6oz / 680ml
Voltage 110V 60 Hz
Power Cord Hard Wired 3m / 9.8′ Power Cord
Power Switch Ignition Proof On / Off Switch
Operating Temperature Range 32F to 125 F (0C to 52C)
Gas Ballast Valve No Yes Yes
Intake Fittings Stainless Steel Inlet Fitting with 1/4″ SAE & 3/8″ JIC Male Ports

Pump Warranty Information

• Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)
• If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
• These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
• When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
• To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.

Product Enquiry

Scientific Solutions
Logo
Compare items
  • Cameras (0)
  • Phones (0)
Compare
Shopping cart