ST20 Stirring Systems

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

This powerful stirring system has a totally enclosed, 1/8 hp, cool, quiet-running, permanent-magnet motor in direct- and gear-drive models with torques from 3.1 lb.-in. (3.57 kg-cm) to 96 lb.-in. (111 kg-cm). It provides a stirrer with more power and a selection of speed ranges up to 2,500 rpm with a continuously variable speed control. Wide variety of sizes and horsepower ratings to meet most applications Feedback circuitry to maintain speed even when viscosity changes DC-filtered motors … Read more

$2,049.00$2,307.00

SKU: 099D, ST20-parent Category: Brand:

Options Detail

Description Quantity Speed Torque
Single-shaft motor, 9:1 gear motor 1 Each 266 rpm 21 lb-in / 2.31 Nm
Single-shaft motor, 4:1 gear motor 1 Each 660 rpm 6 lb-in / 0.66 Nm
Single-shaft motor, 20:1 gear motor 1 Each 125 rpm 46 lb-in / 5.06 Nm
Single-shaft motor, 44:1 gear motor 1 Each 57 rpm 96 lb-in / 10.56 Nm
Single-shaft motor, direct drive 1 Each 2500 rpm 3.1 lb-in / 0.34 Nm



Description

In Stock!
Lead Times May Vary.

This powerful stirring system has a totally enclosed, 1/8 hp, cool, quiet-running, permanent-magnet motor in direct- and gear-drive models with torques from 3.1 lb.-in. (3.57 kg-cm) to 96 lb.-in. (111 kg-cm). It provides a stirrer with more power and a selection of speed ranges up to 2,500 rpm with a continuously variable speed control.

Wide variety of sizes and horsepower ratings to meet most applications
Feedback circuitry to maintain speed even when viscosity changes
DC-filtered motors on most models to handle heavier loads and provide greater durability
Propellers and paddles for most applications
Cord-connected controls for safety and convenience
Reversible motors

Specifications: The ST20 stirring system is furnished complete with motor and mounting bracket, controller, and the following accessories:
099D A260100 3-jaw, keyless chuck and arbor for ST20N and ST220N only
099D A260200 3-jaw, keyless chuck and arbor for ST20 geared models
099D A260106 propeller
100D LC300 heavy-duty 90 clamp
Lab stand 099D A130150 is recommended to mount the ST20.

Lab bench case: 8″w x 6″d x 3.38″h
Motor bracket: 4.5″w x 4.5″d x 9.5″h, with 8.5″ rod
Finish: Foxtip gray and charcoal.

Note: Lab Stand sold separately (see accessories)





Specification


Additional Info

Product Enquiry

Scientific Solutions
Logo
Register New Account
Compare items
  • Cameras (0)
  • Phones (0)
Compare
Shopping cart