1 SciSolLogoWhite

(844) 404-4588

24/7 Customer Support

Rose Scientific – CAT Unidrive X1000D High Power Homogenizer Motor

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare
  • High power, heavy duty drive motor
  • Electronic speed control from 4,000 – 33,000 rpm with digital display
  • Accepts all dispersing tools up to 30 mm in diameter
  • For volume of 1 to 3,000 mL

Call to Customize

Category: Brand:

 

Model Unidrive X1000D high power, heavy duty drive motor with electronic speed control from 4,000 – 33,000 rpm with digital display, 1050 Watts, accepts all dispersing tools up to 30 mm in diameter, ideal for pilot plant or batch processing of products such as tomato paste, for volumes of 1 to 3,000 mL

The CAT dispersing tools and generators have unique slanted rotor slots for fast processing and improved mixing turbulence. The dispersing tools are interchangeable and some (G20, G30, G40) have ceramic shaft seals, so they can be used under vacuum, pressure and abrasive materials. Rotors and stators are exchangeable and there are optional continuous flow chambers (DK30 and DK40) as well as a DK 40 Kit, which consists of drive unit X1740, a flow-through chamber with external cooling, bench mounting device and a G 40 generator.

All CAT disbursing shafts have the same coupling system, allowing all the drive motors to accept any choice of suitable shafts.

T17 Tool, F Generator T17 Tool, N Generator T17 Tool, V Generator T17 Tool, M Generator

 

Dispersing tools are sold complete with rotor and stators as F (fine viscosity), N (low viscosity), V (medium viscosity) F and M (knife version) types. Different rotors and stators are available to interchange. Replacement rotors and stators are available for all types of dispersing tools such as T-6, T-10, T-17, T-20, T-30 and T-40.

The T series tools have a Teflon bearing. Please enquire for more details about the ceramic sealed G-20, G-30 and G-40 tools, for use under vacuum, pressure or with abrasive materials.

 

See Options Below:

60422-000 T-20 Dispersing Tool shaft only, without generator
60422-000V T-20 Dispersing Tool with V Type Generator, 10 – 2,000 mL
60422-000N T-20 Dispersing Tool with N Type Generator, 10 – 2,000 mL
60422-000F T-20 Dispersing Tool with F Type Generator, 10 – 2,000 mL
60422-000M T-20 Dispersing Tool with M Type Generator, 10 – 2,000 mL
60423-000 G-20 Dispersing Tool shaft only, without generator
60423-000V G-20 Dispersing Tool with V Type Generator, 10 – 2000 mL
60423-000N G-20 Dispersing Tool with N Type Generator, 10 – 2000 mL
60423-000F G-20 Dispersing Tool with F Type Generator, 10 – 2000 mL
60423-000M G-20 Dispersing Tool with M Type Generator, 10 – 2000 mL
60414-000 T-30 20mm Ø Dispersing Tool shaft only, without generator
60427-000V T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with V Type Generator, 30 – 5,000 mL
60427-000N T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with N Type Generator, 30 – 5,000 mL
60427-000F T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with F Type Generator, 30 – 5,000 mL
60415-000 G-30 20mm Ø Dispersing Tool shaft only, without generator
60428-000V G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with V Type Generator, 30 – 5,000 mL
60428-000N G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with N Type Generator, 30 – 5,000 mL
60428-000F G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with F Type Generator, 30 – 5,000 mL
60428-000M G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with M Type Generator, 30 – 5,000 mL
60414-000 T-40 20mm Ø Dispersing Tool shaft only, without generator
60414-000V T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with V Type Generator, 100 – 20,000 mL
60414-000N T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with N Type Generator, 100 – 20,000 mL
60414-000F T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with F Type Generator, 100 – 20,000 mL
60414-000M T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with M Type Generator, 100 – 20,000 mL
60415-000 G-40 20mm Ø Dispersing Tool shaft only, without generator
60415-000V G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with V Type Generator, 100 – 20,000 mL
60415-000N G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with N Type Generator, 100 – 20,000 mL
60415-000F G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with F Type Generator, 100 – 20,000 mL
60415-000M G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with M Type Generator, 100 – 20,000 mL

 

60428 DK30 Stainless steel flow-through chamber for shaft G20 and G30, high continuous flow-rate up to 2,000 L/hr, for use with Unidrive 1000D Series (with G20) or X 1740 (with G30)
60429-000 DK40 Stainless steel flow-through chamber, without generator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740
60429-000F DK40 Stainless steel flow-through chamber, with G40 generator and F Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740
60429-000V DK40 Stainless steel flow-through chamber, with G40 generator and V Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740
60429-000N DK40 Stainless steel flow-through chamber, with G40 generator and N Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740
18900131 Plate Stand with Support Rod, base is 12 x 8 inches and the rod is 31 inches in height
A113 H- Base Stand complete with Rod, base accommodates a central 25 mm (1”) diameter stand rod of length 960 mm (38”)
60494 U-Stand (suitable for Unidrive X-1000 and X-1000D Models)
60492 Cross Over Clamp
60495 Special Cross Clamp for use with X-1740 Homogenizer
60470-000 Universal Rotor Wrench, for all shafts 6 to 30mm, except G30 and T30 with M Type generator
60471-000 Socket Wrench for all shafts, 6 to 40 mm diameter
60473-000 Rotor Wrench for T 20 or G 20
60476-000 Rotor Wrench for T 30 or G 30
60477-000 Rotor Wrench for T 40 or G 40

Product Enquiry

Scientific Solutions
Logo
Compare items
  • Cameras (0)
  • Phones (0)
Compare
Shopping cart