HST10 Series Stir Tester

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

The HST10 is available in direct-drive or geared models with a totally enclosed, 1/17 hp, permanent-magnet DC motor. Digital readout displays speed in rpm’s and torque in gm-cm (kg-cm for geared motors). Front panel switch toggles between speed and torque. Actual speeds are displayed and maintained by a synthetic tachogenerator. (Speed is kept within less than 1% of the base speed from no-load to more than 100% of full-load regardless of AC line voltage fluctuations of &… Read more

$2,190.00

SKU: 099D, HST1006-parent Category: Brand:

Options Detail

Description Quantity Speed Torque
Similar to HST10N but with 6:1 gear motor 1 Each 417 rpm 5.4 lb-in / 0.6 Nm
Similar to HST10N but with 12:1 gear motor 1 Each 208 rpm 12 lb-in / 1.32 Nm
Direct drive, rpm/torque readout & X-Y output 1 Each 2500 rpm 1.5 lb-in / 0.17 Nm



Description

In Stock!
Lead Times May Vary.

The HST10 is available in direct-drive or geared models with a totally enclosed, 1/17 hp, permanent-magnet DC motor. Digital readout displays speed in rpm’s and torque in gm-cm (kg-cm for geared motors). Front panel switch toggles between speed and torque.

Actual speeds are displayed and maintained by a synthetic tachogenerator. (Speed is kept within less than 1% of the base speed from no-load to more than 100% of full-load regardless of AC line voltage fluctuations of 10%.)
Viscosity measurement is easier thanks to a controller with a digital readout switch able between speed and torque.
Data on shear stress, shear rate, velocity gradients, and viscosity is accumulated easily with external DC multi-volt signals for speed and torque (for strip or X-Y recorders) available through an output port on the rear of the control.
Operator convenience and safety is increased with cord connections between drive motors and controls to allow control placement away from hostile environments.

Specifications: The HST10 includes a reversible drive motor with mounting bracket, controller, and the following accessories:
099D A210101 3-jaw, keyless chuck and arbor (with HST10N and HST210N only)
099D A260108 3-jaw, keyless chuck and arbor (for HST10 geared motors)
099D A210106 paddle
099D A210107 propeller
100D LC300 heavy-duty 90 clamp
Lab stand 099D A130150 is recommended to mount the HST10.

Lab bench case: 8″w x 8″d x 4.75″h
Motor bracket: 4.38″w x 4.38″d x 7″h, with 8″ rod
Finish: Foxtip gray and charcoal.
Note: Lab Stand sold separately (see accessories)

 





Specification


Additional Info

Product Enquiry

Scientific Solutions
Logo
Register New Account
Compare items
  • Cameras (0)
  • Phones (0)
Compare
Shopping cart