(844) 404-4588
24/7 Customer Support
GT24 Stirrings System
The GT24 stirring system offers the user a stirrer with more power than the GT31 and a selection of speed ranges up to 2,500 rpm. This model combines today’s permanent-magnet motor technology with solid-state electronics. It features totally enclosed, 1/17 hp, cool, and quiet-running motors with direct-drive and geared options, with continuously variable speed control. Wide variety of sizes and horsepower ratings to meet most applications Feedback circuitry to maintain speed even when viscosity … Read more
$1,246.00 – $1,626.00
Options Detail
| Description | Speed | Torque | Voltage |
|---|---|---|---|
| Single-shaft motor, 6:1 gear motor | 417 rpm | 5.4 lb-in, 0.6 Nm | 240 V |
| Single-shaft motor, 12:1 gear motor | 208 rpm | 12 lb-in, 1.32 Nm | 240 V |
| Single-shaft motor, direct drive | 2500 rpm | 1.5 lb-in, 0.17 Nm | 240 V |
| Single-shaft motor, 6:1 gear motor | 417 rpm | 5.4 lb-in, 0.6 Nm | 120 V |
| Single-shaft motor, 12:1 gear motor | 208 rpm | 12 lb-in, 1.32 Nm | 120 V |
| Single-shaft motor, direct drive | 2500 rpm | 1.5 lb-in, 0.17 Nm | 120 V |
Description
In Stock!
Lead Times May Vary.
The GT24 stirring system offers the user a stirrer with more power than the GT31 and a selection of speed ranges up to 2,500 rpm. This model combines today’s permanent-magnet motor technology with solid-state electronics. It features totally enclosed, 1/17 hp, cool, and quiet-running motors with direct-drive and geared options, with continuously variable speed control.
Wide variety of sizes and horsepower ratings to meet most applications
Feedback circuitry to maintain speed even when viscosity changes
DC-filtered motors on most models to handle heavier loads and provide greater durability
Propellers and paddles for most applications
Cord-connected controls for safety and convenience
Reversible motors
Specifications: The GT24 stirring system is furnished complete with motor and mounting bracket, controller, and the following accessories:
099D A210106 – paddle
099D A210107 – propeller
099D A210101 – 3-jaw, keyless chuck (with GT24N and GT224N only)
099D A260108 – 3-jaw, keyless chuck and arbor (with GT2406, GT22406, GT2412 and GT22412 only)
100D LC300 – heavy-duty 90 clamp
Lab stand 099D A130150 is recommended to mount the GT24.
Lab bench case: 8″w x 6″d x 3.38″h
Motor bracket: 4.38″w x 4.38″d x 5.5″h, with 8.5″ rod
Finish: Foxtip gray and charcoal.
Note: Lab Stand sold separately (see accessories)
Specification
Additional Info
