Alumilite High Strength 3

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Categories: , Tag:


Alumilite’s High Strength 3 silicone mold making rubber is our most flexible silicone mold making rubber and is great for making molds of parts with deep undercuts or negative drafts. The High Strength 3’s flexibility and high tear strength give it the ability to reduce seam lines by making one piece molds rather than multiple piece molds where seam line removal is critical. The High Strength 3 is a tin base silicone and cures against all different types of clay and substrate. The tin base silicone is a condensation cure and therefore temperature and humidity may affect the cure speed of the rubber. The High Strength 3 has a low viscosity which does not require degassing (always recommended when available) and will pick up the exact detail of your original.  Use Alumilite’s Rubber to Rubber mold release or petroleum jelly when making 2-piece molds when using the High Strength 3 rubber due to it’s extremely high tear strength.




Alumilite’s High Strength 3

Color Pink
Mix Ratio  10:1 by WEIGHT
Open Time 45 mins
Demold Time 12-18 hours
Mixed Viscosity (cps.) 15,000
Specific Gravity 1.15
Shore A Hardness  8-10
Linear Shrink (%) .3
Tear Strength (ppi) 115
Tensile Strength (psi) 400
Elongation  575%
Temperature Range (F) -67 to 395
Vacuum Required No

Specification: Alumilite High Strength 3

Weight 5 lbs
Scientific Solutions
Register New Account
Reset Password
Compare items
  • Cameras (0)
  • Phones (0)
Shopping cart